Is there a way to dim the LEDs on a KeypadLinc? My wife says they are too bright at night.
Depends on which version you have. The newer ones let you set the backlight brightness by:
Simultaneously press the 3rd and 6th buttons and releasing, presuming KeypadLinc is in 8 button mode; for 6 button mode it is the same physical buttons but will be the 2nd and 5th physical buttons.
Adjust the local load brightness level by holding down KeypadLinc Dimmer’s On/Off Button(s) to brighten or dim the controlled light.
Simultaneously press the 3rd and 6th buttons and then release.
The LED's will mimic the Brightness Level Percentage of the main load
I second this... even with the 10% brightness it's still too bright for us to sleep with our bedroom door open. I cut some paper the size of the keypad button and placed it behind it so it cuts the brightness down to a manageable level (although you still get bleed through around the edge of the button)... unfortunately, this makes difficult to read during the day. Having a simple actionable item that you can trigger with the isDaylight would be awesome.
Indigo only allows dimming down to 10%, but if you use the manual dimming method, you can get all the way down to 0%. I have it set to 0% in my bedroom and it looks great at night. I, too, vote for dimming as an actionable item.
Now when i sleep the house all the LED brightness go to 1 and when we wake up in the morning it goes to 100%... this simple thing makes the whole system feel so much more polished and professional!