View unanswered posts | View active topics It is currently Fri Apr 25, 2014 12:20 am



Reply to topic  [ 8 posts ] 
 X10 motion sensor desensitize? 
Author Message

Joined: May 27, 2007
Posts: 694
Location: NC
Post X10 motion sensor desensitize?
Anyone have a way to desensitize a x10 motion sensor? I have one going off too easily. I tried aiming, but still trips (think its from the wind)

Just a few layers of tape over the 'window'?


Sat Sep 26, 2009 8:00 am
Profile

Joined: Mar 19, 2008
Posts: 489
Location: Saratoga, CA
Post 
As I understand it, PIR sensors use a lens to split their sensitivity pattern into a series of beams. The motion detection works by looking for a sequence of pulses as the IR source moves across the beams.

So depending on what you need to accomplish you might try

- applying tape in vertical sections, starting from the outside and working your way towards the middle. This should narrow the field of view to the area immediately ahead of the sensor.

- apply tape horizontally, starting from the top and/or bottom. This should reduce sensitivity across the entire field while keeping a wide angle.

By the way, for security systems, "dual technology" sensors are great because they don't give false alarms - the moving object has to trip both a PIR and a microwave sensor, and between the two of those sensors, they do not get tripped by ambient heat and light sources. But the problem with these for automation / occupancy sensing is that they do not trip nearly as fast as a PIR.


Sat Sep 26, 2009 11:36 am
Profile

Joined: Jul 23, 2005
Posts: 103
Post 
I required multiple triggers before the software would accept a motion as legitimate. I found 3 motion sensor "on"s before an "off" to be a reasonable method to desensitize the detector.


Sun Sep 27, 2009 1:45 pm
Profile

Joined: Apr 03, 2007
Posts: 95
Post 
ken_jacobs wrote:I required multiple triggers before the software would accept a motion as legitimate. I found 3 motion sensor "on"s before an "off" to be a reasonable method to desensitize the detector.


I would do this, but I often get 10+ in a row from a motion sensor I have outside, when no one is out there to trigger it. They come back-to-back too, like within 1 second or less of each other. When a real person triggers it, I get one X10 ON. I guess I could do the inverse of what you did to solve the problem, but it's still kind of odd.. something wrong with my sensor maybe?

Does wind really trip these things?

I have 6 other sensors indoors that all behave pretty much as I'd expect. Some are oddly more sensitive than others, even though they're all at the same height and aimed pretty much the same way toward foot traffic. But it's reasonable.

-j


Fri Oct 09, 2009 4:08 pm
Profile

Joined: May 27, 2007
Posts: 694
Location: NC
Post 
oops, sorry meant to revisit this thread.

Its ds10a for spme reason tripping it too on the phone home.


Fri Oct 09, 2009 4:51 pm
Profile

Joined: Apr 01, 2003
Posts: 881
Location: Rio Rancho, NM
Post 
jingai wrote:Does wind really trip these things?j


A change in temperature does. The X10 motion detector don't work well outdoors for this reason.

_________________
Greg In The Desert, Home Automation on Always Very Busy


Fri Oct 09, 2009 6:04 pm
Profile WWW

Joined: Jul 23, 2005
Posts: 103
Post 
I would replace the sensor. You can get them on eBay at 3 for $25. I would also consider changing the address of the sensor.


Fri Oct 09, 2009 6:10 pm
Profile

Joined: Apr 03, 2007
Posts: 95
Post 
gregjsmith wrote:
jingai wrote:Does wind really trip these things?j


A change in temperature does. The X10 motion detector don't work well outdoors for this reason.


Well, what kind of a change are we talking about? We're in Florida, so the temperature ranges from 85-95 pretty much this time of year. Is this enough to trip it 30+ times/day?

If so, what sensor should I be using outside? Are the INSTEON sensors better with this?

-j


Fri Oct 09, 2009 6:23 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.   Template designed by STSoftware.