Yeap it worked, so I got the wiring correct along with correctly configuring the 21P alarm panel. So it must be the Indigo configuration then.
High level steps:
1. I configured the AD2USB plugging
2. Configured a device for the Alarm
3. Configured a trigger
I didn't configure "Virtual Zone Device" in indigo. Could skipping that step be the problem?
exiled:~ root# telnet 127.0.0.1 15003
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
!SER2SOCK Connected
!SER2SOCK SERIAL_CONNECTED
112!AUI:0e020000000054fefeec01010101
34
!Sending.done
[0101050100000000----],060,[f702001f106005000c020000000000],"ARMED ***AWAY***May Exit Now 60"
!AUI:120600000000636c02456cf5ec0101010000
!AUI:1706000000006463024543f531fb456cf5ec020201023c
!AUI:0f020000000055fefeec020201023c
[0101050100000000----],059,[f702001f105905000c020000000000],"ARMED ***AWAY***May Exit Now 59"
[0101050100000000----],058,[f702001f105805000c020000000000],"ARMED ***AWAY***May Exit Now 58"
[0101050100000000----],057,[f702001f105705000c020000000000],"ARMED ***AWAY***May Exit Now 57"
[0101050100000000----],056,[f702001f105605000c020000000000],"ARMED ***AWAY***May Exit Now 56"
!LRR:022,1,ARM_AWAY
[0101050100000000----],055,[f702001f105505000c020000000000],"ARMED ***AWAY***May Exit Now 55"
[0101050100000000----],054,[f702001f105405000c020000000000],"ARMED ***AWAY***May Exit Now 54"
berkinet wrote:Have you verified that you can write to the ad2usb at all? Try connecting to ser2sock in a telnet session
telnet 127.0.0.1 15003
Then, when you are connected enter some command (eg. 11234 and return) you can verify (like go into and out of chime mode).
If that works, then the problem is in the plugin and we can look further. Otherwise, either your ad2usb or the panel is mis-configured.