When I start Indigo Server, the client cannot connect for about 3...5 mins. I suspect the Applescript error is the problem. The log is below if someone can help.
Also, I use the thermo and NOAA scripts, do I need the others?

Kyle



Aug 30, 2010 3:55:11 PM
Starting Indigo Server version 4.1.2
Loading attachments
"device target attachment.scpt" script loaded
"group target attachment.scpt" script loaded
"growl attachment.scpt" script loaded
"iTunes attachment.scpt" script loaded
"scenes attachment.scpt" script loaded
"thermo_reset_v100.scpt" script loaded
"thermo_tracking_101.scpt" script loaded
"time stamp attachment.scpt" script loaded
"Weather NOAA sync.scpt" script loaded

Aug 30, 2010 3:57:42 PM
Error script error: around characters 123 to 124
Error script error: AppleEvent timed out. (-1712)
Bonjour registered "Indigo - Putzier Home"
WebServer client authenticated
WebServer started on port 8176 -- authentication disabled

Aug 30, 2010 3:58:13 PM
Trigger Action Start NOAA Weather Applescript
Weather NOAA Weather NOAA Script Launched
Connected to SmartHome PowerLinc USB E
PowerLinc address 05.0C.A2, firmware version 2.13
PowerLinc standalone operation disabled
Indigo directly controlling automation logic

Aug 30, 2010 4:07:57 PM
Indigo Cocoa client authenticated (xxx.xxx.xxx.xxx)

That script error might indicate the problem. You should find the offending script and disable it and see if that solves the problem.

Are any of these scripts required to support the server for ordinary use? Can they be disabled?

"device target attachment.scpt" script loaded
"group target attachment.scpt" script loaded
"growl attachment.scpt" script loaded
"iTunes attachment.scpt" script loaded
"scenes attachment.scpt" script loaded
"time stamp attachment.scpt" script loaded

Kyle

None are required - just move them from:

/Library/Application Support/Perceptive Automation/Indigo 4/Scripts/Attachments

to

/Library/Application Support/Perceptive Automation/Indigo 4/Scripts/Attachments (Disabled)

and restart the server. The scripts that ship with Indigo shouldn't be generating errors (unless you changed them) so I'd pay attention to the following:

"thermo_reset_v100.scpt" script loaded
"thermo_tracking_101.scpt" script loaded

since they don't ship with Indigo. It's also possible it's not one of the attachments scripts but rather one that's embedded in a trigger of some type so you may have to look around for it. It does appear that you have a script in the wrong place - the "Weather NOAA sync.scpt" shouldn't be in the Attachments folder but somewhere else (Background Tasks is a better place for it - that's where it ships).