Hi Matt,

I am having different problems with my 1132CU than the connection problems I reported previously. When I try to communicate with a device I can see the commands being sent in the progress bar but they get half way there and stop. In 1.8 this only happened when some halogen lights in my kitchen were on and when I switched them off the signal would get transmitted. Now that is not happening.

However, I foolishly deleted Indigo 1.8 from my system ... and can't find it on your site. Is it still available?

Yep, we still have 1.8 available for download:

http://www.perceptiveautomation.com/ind ... nload.html

Let me know if the problem you are seeing is specific to 2.0...

Regards,
Matt

Do I need to deinstall Indigo 2 to run 1.8? Whatever the case, I cannot connect to the controller at all from 1.8 so it looks like curtains for the controller.

You can have 2.0 and 1.8 installed on the same Mac -- they each have their own copy of the database and settings files. You just have to make sure you stop the Indigo 2.0 server (Indigo 2->Stop Server menu item if it is enabled) before you try to run 1.8, and likewise if you are running 2.0 make sure you quit Indigo 1.8. Otherwise, both Indigos might be trying to access the PowerLinc at the same time. Unlikely in your case though since it sounds like neither version is able to connect anymore.

Regards,
Matt

Strange thing is that 2.0 says it can connect but the unit is not transmitting. The 1.8 can't connect at all ...
I guess I'll have to operate my appliances manually until the replacement unit arrives ... aaarrrrrhhhh