View unanswered posts | View active topics It is currently Sat May 25, 2013 5:04 pm



Reply to topic  [ 5 posts ] 
 Can't connect to INSTEON modules 
Author Message

Joined: May 12, 2005
Posts: 6
Post Can't connect to INSTEON modules
I can't connect with any INSTEON modules either RF repeaters or Lamplinc V2. I've entered the correct address and when I try to connect a window appears saying "INSTEON interface Powerlink V2) not connected or on line". I'm using a 1132CU, I thought the 1132CU supported INSTEON? What I'm I doing wrong?


Tue Jan 02, 2007 9:23 am
Profile

Joined: Apr 24, 2005
Posts: 44
Location: Essex Junction, Vermont
Post 
I just upgraded to beta 14 and discovered a communication hiccup. I could no longer communicated with Insteon at all. I don't have any X10.

What I discovered is that I had to unplug, and then replug in my 2414U. Until I did this, it always showed as being offline and simply wouldn't connect.

Did you also upgrade to beta 14 by chance?

_________________
Terry

I started off with nothing...I still have most of it left.


Tue Jan 02, 2007 9:54 am
Profile
Site Admin
User avatar

Joined: Jan 27, 2003
Posts: 11698
Location: Texas
Post Re: Can't connect to INSTEON modules
Hi Bernie,

The 1132CU is X10 only. The 2414U (also called the PowerLinc V2) does X10 and INSTEON. This interface matrix shows all the different interfaces and their capabilities. The gotcha is Indigo does not yet upload to the 2414U. So if you want upload support so you can turn off your Mac, then the only option is the X10 only 1132CU. I'm very anxious to get upload support working for the 2414U... it is a high priority and I'll be working on it in a couple of weeks when I get back from Macworld Expo. That said, it is a much more complicated feature than it might seem. :-)

Lastly, note you can define X10 addresses for your INSTEON modules and use them from Indigo in X10 mode. To do this you'll want to choose the X10 type in the Device dialog and choose the LampLinc 2-way model from the popup. Then, follow the instructions that came with the LampLinc to assign it a X10 address. Come to think of it, you probably already did all of this if you have the 1132CU talking to the module at all.

Regards,
Matt


Last edited by matt (support) on Tue Jan 02, 2007 10:03 am, edited 1 time in total.



Tue Jan 02, 2007 9:59 am
Profile WWW
Site Admin
User avatar

Joined: Jan 27, 2003
Posts: 11698
Location: Texas
Post 
Hi Terry,

Terry wrote:What I discovered is that I had to unplug, and then replug in my 2414U.

It sounds like Indigo had a hard time establishing a connection to the 2414U when it re-launched. It could have been a USB problem or the 2414U might have been in a bad state. Can you dig through the Event Log file and see what error message it showed?

Regards,
Matt


Tue Jan 02, 2007 10:01 am
Profile WWW

Joined: Apr 24, 2005
Posts: 44
Location: Essex Junction, Vermont
Post 
support wrote:Hi Terry,

Can you dig through the Event Log file and see what error message it showed?

Regards,
Matt

Here's the log section that pertains


2006-12-31 21:18:04 Application Quiting Indigo Server
2006-12-31 21:18:04 Application Client disconnected
2006-12-31 21:18:08 Error failed to create reflector connection: public/private keys not found
2006-12-31 21:18:08 Application Starting Indigo Server version 2.0.0 beta 13
2006-12-31 21:18:08 Application Loading attachments
2006-12-31 21:18:09 Application "AccuWeather.scpt" script loaded
2006-12-31 21:18:09 Application "device target attachment.scpt" script loaded
2006-12-31 21:18:09 Application "group target attachment.scpt" script loaded
2006-12-31 21:18:09 Application "Growl.scpt" script loaded
2006-12-31 21:18:09 Application "iTunes attachment.scpt" script loaded
2006-12-31 21:18:09 Application "scenes attachment.scpt" script loaded
2006-12-31 21:18:09 Application "time stamp attachment.scpt" script loaded
2006-12-31 21:18:12 Application Connected to SmartHome PowerLinc USB E
2006-12-31 21:18:12 Application PowerLinc address 01.0E.B6, firmware version 2.12
2006-12-31 21:18:12 PowerLinc Bypassing sync of PowerLinc internal application
2006-12-31 21:18:13 Application Client connected
2006-12-31 21:18:15 PowerLinc Read links database
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 00.02.98, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 00.5B.B0, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 01.1C.B6, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 05.36.CE, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 05.A7.0B, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 05.A7.A0, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 05.A8.4E, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 05.A8.68, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 05.EC.F3, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 05.ED.3C, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 05.ED.BB, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 05.EF.41, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 05.EF.80, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 05.EF.DE, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 07.25.69, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 07.39.44, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 07.3E.55, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:15 PowerLinc INSTEON plc link to controller 07.95.FF, flags 03, group 01, data 00 00 FF
2006-12-31 21:18:28 Application Client disconnected
2006-12-31 21:18:56 Received INSTEON "Muffy Ceiling Light" on
2006-12-31 21:19:52 Received INSTEON "Muffy Ceiling Light" off
2006-12-31 21:30:00 Time/Date Action Fetch outside temperature
2006-12-31 21:37:39 Application Quiting Indigo Server
2006-12-31 21:37:49 Error failed to create reflector connection: public/private keys not found
2006-12-31 21:37:49 Application Starting Indigo Server version 2.0.0 beta 14
2006-12-31 21:37:49 Application Loading attachments
2006-12-31 21:37:50 Application "AccuWeather.scpt" script loaded
2006-12-31 21:37:51 Application "device target attachment.scpt" script loaded
2006-12-31 21:37:51 Application "group target attachment.scpt" script loaded
2006-12-31 21:37:51 Application "Growl.scpt" script loaded
2006-12-31 21:37:51 Application "iTunes attachment.scpt" script loaded
2006-12-31 21:37:51 Application "scenes attachment.scpt" script loaded
2006-12-31 21:37:51 Application "time stamp attachment.scpt" script loaded
2006-12-31 21:41:09 Error failed to create reflector connection: public/private keys not found
2006-12-31 21:41:09 Application Starting Indigo Server version 2.0.0 beta 14
2006-12-31 21:41:09 Application Loading attachments
2006-12-31 21:41:12 Application "AccuWeather.scpt" script loaded
2006-12-31 21:41:13 Application "device target attachment.scpt" script loaded
2006-12-31 21:41:15 Application "group target attachment.scpt" script loaded
2006-12-31 21:41:15 Application "Growl.scpt" script loaded
2006-12-31 21:41:20 Application "iTunes attachment.scpt" script loaded
2006-12-31 21:41:21 Application "scenes attachment.scpt" script loaded
2006-12-31 21:41:21 Application "time stamp attachment.scpt" script loaded
2006-12-31 21:41:40 Application Connected to SmartHome PowerLinc USB E
2006-12-31 21:41:40 Application PowerLinc address 01.0E.B6, firmware version 2.12
2006-12-31 21:41:40 PowerLinc Bypassing sync of PowerLinc internal application
2006-12-31 21:41:47 Error resending previous command (timeout)
2006-12-31 21:41:50 Error resending previous command (timeout)
2006-12-31 21:41:50 Error usb data write: timeout
2006-12-31 21:41:50 Error usb data write: clearing pipes
2006-12-31 21:41:50 Error usb data write: failed2 (0xE00002EB)
2006-12-31 21:41:50 Power Failure possible power failure
2006-12-31 21:41:50 Error usb data write: not open (closed during write)
2006-12-31 21:41:50 Error usb data write: not open
2006-12-31 21:41:50 PowerLinc Linking - adding device address 07.25.69 into PowerLinc's database
2006-12-31 21:41:50 PowerLinc Linking - adding device address 07.39.44 into PowerLinc's database
2006-12-31 21:41:50 PowerLinc Linking - adding device address 07.95.FF into PowerLinc's database
2006-12-31 21:41:50 PowerLinc Linking - adding device address 05.36.CE into PowerLinc's database
2006-12-31 21:41:50 PowerLinc Linking - adding device address 05.A7.A0 into PowerLinc's database
2006-12-31 21:41:50 PowerLinc Linking - adding device address 05.A8.4E into PowerLinc's database
2006-12-31 21:41:50 PowerLinc Linking - adding device address 05.EF.41 into PowerLinc's database
2006-12-31 21:41:50 PowerLinc Linking - adding device address 05.A8.68 into PowerLinc's database
2006-12-31 21:41:50 PowerLinc Linking - adding device address 05.EF.80 into PowerLinc's database
2006-12-31 21:41:50 PowerLinc Linking - adding device address 05.EC.F3 into PowerLinc's database
2006-12-31 21:41:50 PowerLinc Linking - adding device address 05.EF.DE into PowerLinc's database
2006-12-31 21:41:50 PowerLinc Linking - adding device address 05.ED.3C into PowerLinc's database
2006-12-31 21:41:50 PowerLinc Linking - adding device address 05.ED.BB into PowerLinc's database
2006-12-31 21:42:02 Application Client connected
2006-12-31 21:45:00 Time/Date Action Fetch outside temperature
2006-12-31 21:48:38 Application Client connected
2006-12-31 21:52:16 Application Quiting Indigo Server
2006-12-31 21:52:16 Application Client disconnected
2006-12-31 21:52:16 Application Client disconnected
2006-12-31 21:52:35 Error failed to create reflector connection: public/private keys not found
2006-12-31 21:52:35 Application Starting Indigo Server version 2.0.0 beta 14
2006-12-31 21:52:35 Application Loading attachments
2006-12-31 21:52:35 Application "AccuWeather.scpt" script loaded
2006-12-31 21:52:35 Application "device target attachment.scpt" script loaded
2006-12-31 21:52:35 Application "group target attachment.scpt" script loaded
2006-12-31 21:52:35 Application "Growl.scpt" script loaded
2006-12-31 21:52:35 Application "iTunes attachment.scpt" script loaded
2006-12-31 21:52:35 Application "scenes attachment.scpt" script loaded
2006-12-31 21:52:35 Application "time stamp attachment.scpt" script loaded
2006-12-31 21:52:36 Application Client connected
2006-12-31 21:52:37 Application Client connected
2006-12-31 21:52:39 Application Connected to SmartHome PowerLinc USB E
2006-12-31 21:52:42 Error resending previous command (timeout)
2006-12-31 21:52:42 Error usb data write: timeout
2006-12-31 21:52:42 Error usb data write: clearing pipes
2006-12-31 21:52:42 Error usb data write: failed2 (0xE00002EB)
2006-12-31 21:52:42 Power Failure possible power failure
2006-12-31 21:52:42 Error usb data write: not open (closed during write)
2006-12-31 21:52:42 Error failed to establish connection with main interface
2006-12-31 22:00:00 Time/Date Action Fetch outside temperature
2006-12-31 22:02:34 Application Quiting Indigo Server
2006-12-31 22:02:34 Application Client disconnected
2006-12-31 22:02:34 Application Client disconnected
2006-12-31 22:02:37 Application Starting reflector connection to https://nortonhouse.goprism.com
2006-12-31 22:02:37 Application Starting Indigo Server version 2.0.0 beta 14
2006-12-31 22:02:37 Application Loading attachments
2006-12-31 22:02:37 Application "AccuWeather.scpt" script loaded
2006-12-31 22:02:37 Application "device target attachment.scpt" script loaded
2006-12-31 22:02:37 Application "group target attachment.scpt" script loaded
2006-12-31 22:02:37 Application "Growl.scpt" script loaded
2006-12-31 22:02:37 Application "iTunes attachment.scpt" script loaded
2006-12-31 22:02:37 Application "scenes attachment.scpt" script loaded
2006-12-31 22:02:37 Application "time stamp attachment.scpt" script loaded
2006-12-31 22:02:37 Application Client connected
2006-12-31 22:02:39 Application Client connected
2006-12-31 22:02:41 Application Connected to SmartHome PowerLinc USB E
2006-12-31 22:02:44 Error resending previous command (timeout)
2006-12-31 22:02:45 Error usb data write: timeout
2006-12-31 22:02:45 Error usb data write: clearing pipes
2006-12-31 22:02:45 Error usb data write: failed2 (0xE00002EB)
2006-12-31 22:02:45 Power Failure possible power failure
2006-12-31 22:02:45 Error usb data write: not open (closed during write)
2006-12-31 22:02:45 Error failed to establish connection with main interface
2006-12-31 22:04:14 Sent (offline) "Livingroom Lamp" on to 48
2006-12-31 22:04:14 Trigger Action Growl for Livingroom Lamp
2006-12-31 22:04:19 Sent (offline) "Livingroom Lamp" on to 68
2006-12-31 22:04:19 Trigger Action Growl for Livingroom Lamp
2006-12-31 22:04:23 Sent (offline) "Livingroom Lamp" on to 50
2006-12-31 22:04:23 Trigger Action Growl for Livingroom Lamp
2006-12-31 22:04:33 Application Connected to SmartHome PowerLinc USB E
2006-12-31 22:04:36 Error resending previous command (timeout)
2006-12-31 22:04:36 Error usb data write: timeout
2006-12-31 22:04:36 Error usb data write: clearing pipes
2006-12-31 22:04:36 Error usb data write: failed2 (0xE00002EB)
2006-12-31 22:04:36 Power Failure possible power failure
2006-12-31 22:04:36 Error usb data write: not open (closed during write)
2006-12-31 22:04:36 Error failed to establish connection with main interface


This is the point I powered down the 2414U, then all was fine. I didn't know what the Reflector stuff was in the beginning, but it works super now.

_________________
Terry

I started off with nothing...I still have most of it left.


Tue Jan 02, 2007 11:15 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.   Template designed by STSoftware.