I just found this...

http://www.bluelineinnovations.com/Prod ... ON-Bridge/

Are there any plans to support this in Indigo ?

First I've heard of it. We'll get the specs from the SHN guys (although I see they're changing their name also). We have a waiting list of devices to add support for so it will be a while I suspect.

Any news on support for this module?

Nothing to report - it's not particularly high on the priority list given extremely low demand.

I'm guessing support for this has not been added in Indigo Pro 5.1.5? Is it something that could be added through a plugin (i.e. shorter development time/commitment)?

Do you have one? I thought about getting one, but I'm pretty sure my meter isn't compatible.

It is my understanding that it supports the iMeter Solo INSTEON commands. If that is the case, then all we need to do is add the model ID to Indigo. If anyone has one, then copy/paste what you see after doing a Define and Sync and I'll add the model ID to Indigo as an iMeter Solo and we can see if it works.

No, not yet. I was thinking about getting one as well though. If I get one before anyone else here does, though, I'll post the define-and-sync log for you. Thanks!

I don't have one to test with yet (hope to soon), but I have added it to Indigo based on the iMeter Solo definition.

Awesome! I don't have one yet either, but I look forward to trying it out when I do get one.

I bought a Smartenit Model 5010T ZBPCM Which I think is what you are talking about. It won't sync with Indigo. I have the Blue line Power monitor already. Sure wish I could use this device. Any suggestions?

PowerLinc Linking - entered discovery linking mode (240 seconds)
PowerLinc Linking - received module button pressed from 1E.7E.4B
PowerLinc Linking - syncing PowerLinc links (address 13.1F.99)
PowerLinc Linking - . . adding: INSTEON plc link to controller 1E.7E.4B, flags 03, group 01, data 00 00 FF
PowerLinc Linking - . . adding: (not added -- probably already exists)
PowerLinc Linking - PowerLinc links updated
PowerLinc Linking - sync complete
PowerLinc Linking - sending engine version request to 1E.7E.4B
PowerLinc Linking - received engine version 02 from 1E.7E.4B
PowerLinc Linking - sending id request for device information to 1E.7E.4B
PowerLinc Linking - received id request response from 1E.7E.4B
PowerLinc Linking - retrieving firmware version
Error firmware version address is unknown (should be in device table)
Error Linking - no match found for device type ID 2304 with firmware version 00
Error linking failed

What version of Indigo are you running? I believe we added it to v5.1.6.

I just upped to 5.1.8

Before or after your original post?

Is it working now?

No, Sorry... No perceived change


PowerLinc Linking - entered discovery linking mode (240 seconds)
PowerLinc Linking - received module button pressed from 1E.7E.4B
PowerLinc Linking - syncing PowerLinc links (address 13.1F.99)
PowerLinc Linking - . . adding: INSTEON plc link to controller 1E.7E.4B, flags 03, group 01, data 00 00 FF
PowerLinc Linking - . . adding: (not added -- probably already exists)
PowerLinc Linking - sync complete
PowerLinc Linking - PowerLinc links updated
PowerLinc Linking - sending engine version request to 1E.7E.4B
PowerLinc Linking - received engine version 02 from 1E.7E.4B
PowerLinc Linking - sending id request for device information to 1E.7E.4B
PowerLinc Linking - received id request response from 1E.7E.4B
PowerLinc Linking - retrieving firmware version
Error firmware version address is unknown (should be in device table)
Error Linking - no match found for device type ID 2304 with firmware version 00
Error linking failed
PowerLinc Linking - entered discovery linking mode (240 seconds)
PowerLinc Linking - exited linking mode

That device (type ID 2304) should definitely be in Indigo 5.1.8. Choose the Indigo->About Indigo menu item. Does it show 5.1.8 for both the server and client?