- Posted on
Tue Oct 02, 2012 7:14 pm
-
duanel
offline
-
- Posts: 21
- Joined: Apr 09, 2012
I have an Insteon Thermostat (2441TH) that was just installed today. It operates fine as a simple programmable thermostat, but I'm unable to link it to Indigo. I have dozens of Insteon devices throughout my house and this is the first time I've seen this issue. Indigo "sees" the device, but is unable to complete linking. Here's my log output:
PowerLinc Linking - entered discovery linking mode (240 seconds)
PowerLinc Linking - received module button pressed from 1D.6E.1F
Oct 2, 2012 8:46:59 PM
PowerLinc Linking - syncing PowerLinc links (address 0F.DD.3D)
PowerLinc Linking - . . adding: INSTEON plc link to controller 1D.6E.1F, flags 03, group 01, data 00 00 FF
PowerLinc Linking - . . adding: (not added -- probably already exists)
PowerLinc Linking - sync complete
PowerLinc Linking - sending engine version request to 1D.6E.1F
PowerLinc Linking - PowerLinc links updated
PowerLinc Linking - received engine version 01 from 1D.6E.1F
PowerLinc Linking - sending id request for device information to 1D.6E.1F
PowerLinc Linking - received id request response from 1D.6E.1F
PowerLinc Linking - initializing remote device "Foyer Thermostat" (address 1D.6E.1F, firmware version 91)
PowerLinc Linking - . reading: settings and date/time
Error request for date/time not acknowledged
PowerLinc Linking - initialize complete
PowerLinc Linking - syncing remote device "Foyer Thermostat" (address 1D.6E.1F, firmware version 91)
PowerLinc Linking - syncing all links
Oct 2, 2012 8:47:36 PM
Error failed to fetch data from remote module
Error Linking - syncing failed
Error linking failed
PowerLinc Linking - entered discovery linking mode (240 seconds)
PowerLinc Linking - exited linking mode