Hi,
I know this is an older thread but it was one of the few I found discussing the Detach Load option with someone trying to reassign the load to another button. I was able to achieve this recently and wanted to share in case it could help anyone else. I registered here solely for this purpose
Thanks to the developer of the 3rd party Insteon plugin for HomeSeer 3, who got a tip from his contact at Insteon, I was able to link the load to a different button on the same keypad.
Here is the original thread:
https://forums.homeseer.com/forum/light ... load/page3 To sum it up:
Note: I was in 8 button mode and reassigned the load to Button B
1) Make sure the load is still attached to Button A (Main On/Off)
2) Tap the button that you want to have control the load (Button X), it doesn't matter if you are turning the button on or off
3) Press and hold the Set button until Keypad beeps, Button X should be blinking
4) Press and hold Button A (Main On/Off) until the keypad beeps and Button X stops blinking
Button X should now control the load AND Button A (Main On/Off). However, Button A (Main On/Off) won't control Button X. This is OK because now is when you want to detach the load
5) Detach the load
Now, only Button X should control the load.
Note: this doesn't work exactly like when Button A (Main On/Off) controls the load. If you remotely control Button X, or include just Button X in a group or link, the load will not be controlled. You must include both the newly created Load device and Button X when doing any linking or creating groups if you want to keep them in sync, just like when linking two separate devices.
Hopefully this can help someone else. Happy HAing!