tornado wrote:How do you get to these parameters?
Thanks
Joe
Parameters (Advanced Settings) You can usually google this information on any new zwave device to see how it can be tweaked.
For the Zen17 --> https://www.support.getzooz.com/kb/article/698-zen17-universal-relay-advanced-settings/
Top Menu Bar: Interfaces --> Z-Wave --> Modify Configuration Parameter...
I usually will click the "Read Current Value" first, then put in what I want it to be, then "Save New Value". I usuall also have the log running on the screen to make sure the information is going through and no communication errors or anything.
Somewhere it may have been posted that after modifying certain perameters on the device, you may have to exclude the device, then re-include it. I havn't run into that myself yet, but like I mentioned above, I'm not 100% sure my zen17 is setup correctly. Since it is hooked up to my alarm panel, it will probably be an all day thing to make adjustments without setting off the house alarm. I loose serious wife points when I too much noise.