I have two of these devices. One for about a year that is working perfectly; the other just very recently.
I am unable to switch off the new socket. Any ideas ?
I note that parameter 1 can be set via UI option : Force module to always ON (disable OFF)
Param 1 is defined as per :
https://manuals.fibaro.com/document/fgw ... arameters/However, neither the UI or the Modify Configuration Parameter options seem to work, and the device is left on all the time.
When I try to read the value of parameter 1, I get:
Z-Wave Error failed to read value -- device may not support parameter 1 or may be asleep
(This happens on the existing device (this is working fine) and the new device (which does not want to switch off).
When I sync the device, I get the following:
2023-10-16 21:40:59.207 Z-Wave Syncing - started for "study power socket"
2023-10-16 21:40:59.214 Z-Wave Syncing - retrieved module neighbors list: 9, 14, 15, 19, 22, 25, 37
2023-10-16 21:40:59.214 Z-Wave Syncing - assigning return route to "038 - study power socket"
2023-10-16 21:40:59.992 Z-Wave Syncing - assigned return route
2023-10-16 21:41:00.437 Z-Wave Syncing - retrieved manufacture and model names: Fibaro System - 010F, Wall Plug Relay (FGWPG111) - 18011000
2023-10-16 21:41:00.489 Z-Wave Syncing - retrieved protocol version 4.61, app version 4.02
2023-10-16 21:41:00.539 Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01, base 25)
2023-10-16 21:41:00.539 Z-Wave Syncing - retrieved command classes: 20v1 25v1 27v1 5Ev1 85v1 8Ev1 59v1 55v1 86v1 72v1 5Av1 73v1 98v1 9Fv1 6Cv1 32v3 70v1 56v1 71v1 75v1 7Av1 22v1
2023-10-16 21:41:00.539 Z-Wave Syncing - retrieved encrypt commands: - none -
2023-10-16 21:41:00.539 Z-Wave Syncing - retrieved capabilities: routing, beaming, security
2023-10-16 21:41:00.639 Z-Wave Syncing - retrieved group 1 associations: [1]
2023-10-16 21:41:00.690 Z-Wave Syncing - retrieved group 2 associations: []
2023-10-16 21:41:00.740 Z-Wave Syncing - retrieved group 3 associations: []
2023-10-16 21:41:00.741 Z-Wave Syncing - group 1 association to interface already exists (skipping)
2023-10-16 21:41:19.452 Z-Wave Syncing - failed to retrieve parameter 1 "Force module to always ON (disable OFF)" (skipping)2023-10-16 21:41:19.500 Z-Wave Syncing - retrieved parameter 2 "Power up to last known state" is false
2023-10-16 21:41:19.551 Z-Wave Syncing - retrieved parameter 40 "Power exceeded threshold" is 30000 * 0.1 watts
2023-10-16 21:41:19.602 Z-Wave Syncing - retrieved parameter 3 "Power overloaded threshold" is 0 * 0.1 watts
2023-10-16 21:41:37.951 Z-Wave Syncing - failed to retrieve parameter 10 "Immediate power threshold" (skipping)
2023-10-16 21:41:38.000 Z-Wave Syncing - retrieved parameter 11 "Interval power threshold" is 10 %
2023-10-16 21:41:38.051 Z-Wave Syncing - retrieved parameter 12 "Interval report delay" is 15 seconds
2023-10-16 21:41:38.102 Z-Wave Syncing - retrieved parameter 13 "Energy report threshold" is 3600 * 0.1 kWh
2023-10-16 21:41:38.153 Z-Wave Syncing - retrieved parameter 14 "Periodic power reports" is 3600 seconds
2023-10-16 21:41:38.204 Z-Wave Syncing - retrieved parameter 15 "Include Wall Plug energy usage in reports" is false
2023-10-16 21:41:38.255 Z-Wave Syncing - retrieved parameter 41 "LED ring color when ON" is 1 "Smooth Color Change from Power"
2023-10-16 21:41:38.305 Z-Wave Syncing - retrieved parameter 42 "LED ring color when OFF" is 0 "Off"
2023-10-16 21:41:38.391 Z-Wave Syncing - complete
This is remarkably similar to the existing device.
Any thoughts or pointers appreciated.