MarcoGT wrote:I have a question about the map; I added a motion sensor (battery powered) and 3 bulbs; I have at the moment range problem as the Zigbee controller is inside the rack (metal), therefore I need a longer cable; but one bulb is working; shall this acts as a repeater so that the other two bulbs also work? At the moment there is no connection between the the controller and two bulbs.
MarcoGT wrote:But they need anyway to be connected to a plug, why not using directly a wall plug to act as a repeater?
Zigbee2mqtt Bridge Warning RECEIVED TOPIC: zigbee2mqtt/0xdc8e95fffe3ae5ae, PAYLOAD: {"cli":" ","detection_delay":0.6,"fading_time":14,"illuminance_lux":149,"linkquality":69,"maximum_range":7.95,"minimum_range":0.75,"presence":false,"radar_sensitivity":7,"self_test":"check_success","target_distance":0}
Zigbee2mqtt Bridge Error JSON device|ieeAddr error. Payload: {"cli":" ","detection_delay":0.6,"fading_time":14,"illuminance_lux":149,"linkquality":69,"maximum_range":7.95,"minimum_range":0.75,"presence":false,"radar_sensitivity":7,"self_test":"check_success","target_distance":0}
In order for the plugin to work, the Include device information (at the bottom of the MQTT tab) needs to be set as it uses this information to discover the properties of the Zigbee devices so that it can determine how to support them.
Zigbee2mqtt Bridge Error MQTT topic 'zigbee2mqtt/zigbee_router_2/indicator_level' is missing 'device' and|or 'ieeAddr' keys in JSON payload:
Zigbee2mqtt Bridge Warning {"light":null}
Zigbee2mqtt Bridge Error See Wiki Installation documentation at: https://github.com/autolog/Zigbee2mqtt_Bridge/wiki/Installation
Zigbee2mqtt Bridge Error MQTT topic 'zigbee2mqtt/zigbee_router_3/indicator_level' is missing 'device' and|or 'ieeAddr' keys in JSON payload:
Zigbee2mqtt Bridge Warning {"light":null}
Zigbee2mqtt Bridge Error See Wiki Installation documentation at: https://github.com/autolog/Zigbee2mqtt_Bridge/wiki/Installation
zigbee2mqtt/zigbee_router_1
{
"device":
{
"applicationVersion": 0,
"dateCode": "20220515",
"friendlyName": "zigbee_router_1",
"hardwareVersion": 0,
"ieeeAddr": "0x385b44fffe0038bc",
"manufacturerID": 4742,
"manufacturerName": "SONOFF",
"model": "ZBDongle-E",
"networkAddress": 25842,
"powerSource": "Mains (single phase)",
"softwareBuildID": "1.0.0",
"stackVersion": 0,
"type": "Router",
"zclVersion": 8
},
"light_indicator_level": null,
"linkquality": 123
}
zigbee2mqtt/zigbee_router_1/indicator_level
{"light":null}
>>> m='{"light":null}'
>>> x=json.loads(m)
>>> x
{'light': None}
Users browsing this forum: No registered users and 3 guests