Bond Home Plugin

Nah. I think it's an error caused by a plugin update somewhere along the line. First, just try editing and saving the Indigo device and see if that sets the property correctly. If not, try re-creating the device.

looks like recreating them is the only way.

Before:

Code: Select all

   Script                          address : 53913e1e
batteryLevel : None
buttonGroupCount : 0
configured : True
description : First floor office fan (53913e1e)
deviceTypeId : bondDevice
displayStateId :
displayStateImageSel : NoImage
displayStateValRaw : None
displayStateValUi :
enabled : True
energyAccumBaseTime : None
energyAccumTimeDelta : None
energyAccumTotal : None
energyCurLevel : None
errorState :
folderId : 445826354
globalProps : MetaProps : (dict)
     com.flyingdiver.indigoplugin.bondhome : (dict)
          SupportsStatusRequest : false (bool)
          address : 53913e1e (string)
          bond_type : CF (string)
          bridge : ZZDF76026 (string)
          off_command : TurnOff (string)
          on_command : TurnOn (string)
id : 717983124
lastChanged : 2021-01-12 15:39:39
lastSuccessfulComm : 2021-01-12 15:39:39
model : Bond Generic Device
name : Office fan
ownerProps : com.flyingdiver.indigoplugin.bondhome : (dict)
     SupportsStatusRequest : false (bool)
     address : 53913e1e (string)
     bond_type : CF (string)
     bridge : ZZDF76026 (string)
     off_command : TurnOff (string)
     on_command : TurnOn (string)
pluginId : com.flyingdiver.indigoplugin.bondhome
pluginProps : emptyDict : (dict)
protocol : Plugin
remoteDisplay : False
sharedProps : com.indigodomo.indigoserver : (dict)
states : States : (dict)
subModel : Ceiling Fan
subType : Ceiling Fan
supportsAllLightsOnOff : False
supportsAllOff : False
supportsOnState : False
supportsStatusRequest : False
version : None


After

Code: Select all

   Script                          address : 53913e1e
batteryLevel : None
buttonConfiguredCount : 0
buttonGroupCount : 0
configured : True
description :
deviceTypeId : bondDevice
displayStateId : onOffState
displayStateImageSel : PowerOff
displayStateValRaw : False
displayStateValUi : off
enabled : True
energyAccumBaseTime : None
energyAccumTimeDelta : None
energyAccumTotal : None
energyCurLevel : None
errorState :
folderId : 445826354
globalProps : MetaProps : (dict)
     com.flyingdiver.indigoplugin.bondhome : (dict)
          SupportsStatusRequest : false (bool)
          address : 53913e1e (string)
          bond_type : CF (string)
          bridge : ZZDF76026 (string)
          off_command : TurnOff (string)
          off_parameter :  (string)
          on_command : TurnOn (string)
          on_parameter :  (string)
id : 1786056625
lastChanged : 2000-01-01 00:00:00
lastSuccessfulComm : 2000-01-01 00:00:00
ledStates : []
model : Bond Device
name : Office Fan 2
onState : False
ownerProps : com.flyingdiver.indigoplugin.bondhome : (dict)
     SupportsStatusRequest : false (bool)
     address : 53913e1e (string)
     bond_type : CF (string)
     bridge : ZZDF76026 (string)
     off_command : TurnOff (string)
     off_parameter :  (string)
     on_command : TurnOn (string)
     on_parameter :  (string)
pluginId : com.flyingdiver.indigoplugin.bondhome
pluginProps : emptyDict : (dict)
protocol : Plugin
remoteDisplay : True
sharedProps : com.indigodomo.indigoserver : (dict)
states : States : (dict)
     onOffState : off (on/off bool)
subModel : Ceiling Fan
subType : Ceiling Fan
supportsAllLightsOnOff : False
supportsAllOff : False
supportsOnState : True
supportsStatusRequest : False
version : None

Yeah, I probably need to fix that. If I can.

I will tell you one other thing that I think mattered. I had the on command configured to just turn on in the configuration. it wasn't until I changed the on to set speed and added a variable that it really made a difference and the icon next to the device started updating. that may be a hold over from just getting them set up in the early learning stages on my part.

I am glad that I didn't have to really recreate all my triggers. that would have been a royal pain.

ok since I am in this, any thoughts on:

device "Bond Bridge" state key brightnessLevel not defined (ignoring update request)

Similar issue. The older (nonPro) bridges have a brightness control for the blue light. The new Pro bridges (or any Smart by Bond device) do not. It's a mess.

ok I have the older one with the control (which I love and have it off). I'll leave that one alone. it only shows when the plugin starts up.

Thanks for the help today.

If you would, create issues in GitHub for both those issues so that next time I'm in the code for that plugin I'll remember to try to fix those.