Anyone else using it?
After adding it, Indigo happily see the device but say it does not support it.
The log shows:
5 Jun 2021 at 13:38:18
Z-Wave received "Lada Kylskåp" mode is off
Z-Wave received "Lada Kylskåp" is idle
Z-Wave received "Lada Kylskåp" temperature update to 66.5 °F
Z-Wave received "Lada Kylskåp" units changed to °F
Z-Wave received "Lada Kylskåp" heat setpoint is 22.0 °C
Z-Wave received "Lada Kylskåp" units changed to °C
5 Jun 2021 at 13:43:21
Z-Wave received "Lada Kylskåp" mode is off
Z-Wave received "Lada Kylskåp" is idle
Z-Wave received "Lada Kylskåp" temperature update to 19.2 °C
Z-Wave received "Lada Kylskåp" heat setpoint is 22.0 °C
Z-Wave received "Lada Stallförråd" energy total to 26.06 kWh
Some things I can do with the device, but not really control it, and it definitely stays in some weird state. I am trying to use it for turning compressor on and off in a fridge, but it stays in off mode.
The device information is as follows:
5 Jun 2021 at 13:36:43
Z-Wave Indigo Device "Lada Kylskåp" Z-Wave Properties:
Indigo Z-Wave Version: 7.5.0
Node ID: 32
Model: General Thermostat (v2)
Model ID: 00050054
Manufacturer: Qubino
Manufacturer ID: 0159
Protocol Version: 6.09
Application Version: 21.00
Model Definition Version: 0
Library Type: 3
Class Name: General Thermostat (v2)
Class Hierarchy: 04 : 08 : 06
Command Class Base: 40
Command Versions: 20v1 40v1 42v1 43v1 85v1 86v1 31v7 6Cv1 32v4 70v1 71v1 72v1 73v1 55v1 59v1 5Av1 5Ev1 9Fv1
Encryption Status: Not Supported
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, beaming, energyMeter
Neighbors: 2, 8, 11, 26
Associations: 1:[1] 2:[] 3:[] 4:[]
Config Values: - none -