|
Are you getting frustrated because you’re having problems getting your transmitted signal to that device in the next room? Maybe sometimes it works and sometimes it doesn’t. What to do? Most likely it’s because another electrical device is adding interference on the power line or absorbing your transmitted signals. Common sources of interference include refrigerators, freezers, plug-in fluorescent fixtures, aquarium filters, fountains, low-voltage lighting, fans, or anything with a motor. It may be time to invest in the FilterLinc 10-Amp Plug-In Noise Filter. Try unplugging what you think may be the guilty device and re-transmit the signal. If the balky device begins working after the appliance is unplugged, then the FilterLinc 10-Amp Plug-In Noise Filter will work for you.
The FilterLinc 10-Amp Plug-In Noise Filter:
- Eliminates interference on the power line, so X10 and/or INSTEON signals remain strong and clear
- Prevents X10 signals from being absorbed by appliance power supplies
- Has an unfiltered feed-through outlet so you can you plug in other devices
- Is fully ETL approved
If your home automation set-up is minimal, chances are you won't encounter signal-strength problems. But if you're using several switches, modules, and controllers throughout the house, then the chances increase that you'll need to supplement your system with the FilterLinc 10-Amp Plug-In Noise Filter. It not only blocks unwanted interference on the power line, but also prevents other devices from attenuating your signals. The most common sources of signal attenuation include computers and audio/video equipment, particularly big-screen TVs. Also, the 10-amp plug-in noise filter is fully compatible with FM intercoms and Home PNA devices.
Specifications
- Dimensions: 4.26" / 2.47" / 1.5"
- Weight: .6 lbs.
- Filtered outlet: 10A, max
- Unfiltered outlet: 15A, max
- Combined total: 15A, max
- Plug-In Wall Outlet: 120-volt, 3-prong
- Attenuation: 49.2dB @ 120kHz
- Color: gray finish
- Warranty: 2 years
|
